Nitrate FX Regenerable Nitrate Resin Blue Life USA

 

Any of our Blue Life USA resins can be regenerated with the use of Regen Fx for reuse 6 or more times.

250ml treats 125 gallons

500ml treats 250 gallons

 

Use in fresh to safely reduce nitrates and aid in water clarity.

 

Instructions and Guidelines

Prior to first use, rinse each bag of resin by passing a steady stream of fresh water (RO Preferrably) 4 to 5 cups approximately; discard water once completed.

Each 250ml of Nitrate Fx will remove 10ppm nitrate in 125 US-gallons of water (or 5ppm per 250 US-gallons) and 500ml will remove 10ppm nitrate in 250 US-gallons of water (or 5ppm per 500 US-gallons). Removal is directly related to resin contact time with water; maximizing contact time with water will remove more nitrates and aid in the overall quality of aquarium water. For best results, resins should be used inside a reactor or a pressurized canister. Nitrate Fx is regenerable multiple times, making it a cost effective means for reduction of nitrates in freshwater aquariums.

 

Regeneration Instructions

Dissolve 1 Blue Life USA Regeneration Kit into 1/2 gallon of room-temperature water per 250-ml of resin to be regenerated in a clean pail; place resin into pail and stir; allow Nitrate Fx to soak at least 1 hour (for best results soak overnight) frequently agitating the bags; then remove from regeneration solution and rinse thoroughly in fresh water before re-using. Do not regenerate with bleach, this will permanently damage the adsorption resin and could kill aquarium inhabitants.

 

Caution: Resin sold moist. Keep closed to prevent drying. Weight varies due to moisture content, product is sold by volume rather than weight. DO NOT LET RESIN DRY OUT!