Top Filter RS-950B:
A clogged or dirty intake screen will greatly perform. If the pump is used on a dirty surface,raise it slightly to reduce the amount of debris contacting the intake,less flow is desired,adjust the flow control level
To clean the pump,remove the front plate and the impeller. Use a small brush or steam of water to remove any debris
If the pump falls to operate ,check the following. Check the circuit breaker and outlet to ensure the pump. Check the pump discharge and tubing for kinds and obstructions,remove the pump inlet to access area. Turn the rotor to ensure it is not brokenor jammed,monthly maintenance will add to your pump’s life
Ensure that the electrical cord loops below the electrical outlet to form a Drip Loop,it will prevent water from running down the cord into the electrical outlet.