ATO One is a smart water replenishing device that requires only the sensor and the refill pump to be installed. It can be used after power-on without setting any parameters. It can be used without powering any parameters. Standard 1 optical level sensor and 1 float level sensor. The optical level sensor is used to monitor the water level to determine whether water needs to be replenished. The float level sensor is used to prevent overflow. An optional float level sensor is available to monitor the freshwater reservoir for water shortage. ATO One is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One will have an indicator light and a buzzer alarm.
Minimize the time spent on maintenance and water changes. The new Kamoer One Auto top Up/Off unit with pump come with optical sensor and magnet holder which provides precision automatic water top off of aquarium tank evaporated water. Kamoer ATO One SE is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One SE will have an indicator light and buzzer alarm. Hmax: 1.5 – 2.0m. Qmax: 500 L/H
Kamoer ATO One SE is a smart water replenishing device for meeting the needs of using freshwater reservoir. As long as the sensors and refill pump are installed, it can work after powering on without any settings. A Kamoer standard 1 optical level sensor is used to monitor the water level to determine whether water needs to be replenished, whilst the Kamoer standard 1 float level sensor is used to prevent overflow.
An optional float level sensor is available to monitor the freshwater reservoir for water shortage.
The Kamoer ATO One SE is rich in status indicators. When the Anti-overflow Sensor or overtime, the refill pump is not inserted or the freshwater reservoir is short of water, the ATO One SE will have an indicator light and a buzzer alarm.
- The controller comes with 2 level sensors: Float sensor (S1) and Optical sensor (S2)
- Optical bracket (large mouth) x 1
- Float bracket (small mouth) x 1
- Plastic magnet x 4
- Power Adapter x 1 DC 12V 1A Support US/EU/GB/ AUS standard
- Refill Pump x 1 For refilling water
- Tube Holder x 1 For fixing water pipes
- Siphon Break x 1 1/4straight through to prevent siphoning
- PVC pump tube x 2 m Pipe diameter 8x11mm
- Quick Start Guide
Step 1: Mount the optical sensor (S2) to normal water level. Note that the optical level sensor should be away from the air bubbles, otherwise it will be misunderstood due to interference.
Step 2: Mount the float sensor (S1) above normal water level. If the water level reaches this position, it means that the optical sensor has failed, the device will alarm and force the refill pump to stop working. Note that the float sensor bracket cannot be reversed and should be away from the floater, otherwise the plastic magnet will interfere with the sensor signal;
Step 3: Connect ATO refill tube(Pump<-> Siphon Break <-> Tube Holder)。Note the siphon break should be installed in the freshwater reservoir and ensure that it is higher than the position of the liquid level of the freshwater reservoir at any time.
Step 4: Connect the refill pump’s cable to the Pump jack; Note that there is a valve control flow on the make-up water pump net cover, which is set to the required position according to the actual use.
Step 5: Connect the adapter’s cable to the DC12V jack and power up the adapter.
- Please use the power adapter that comes with the product.
- The optical liquid level sensor is susceptible to the influence of dirt. Please pay attention to erasing the dirt on the sensor.
- This product does not have waterproof function. Please use it in the environment of temperature 0-40 ° C and humidity <80%.
Alarm and Reminder
|The red light flashes at medium speed. Buzzer medium speed tweet|
(On 0.5s, Off 0.5 s)
1. Check the optical sensor has stains or foreign objects.
2. Power off and restart
|1. Check the|
|The red light flashes quickly.|
Buzzer quickly screams
(On 0.1s, Off 0.1s)
Pump is not inserted or faulty
|submersible pump connection|
2. If the problem is not solved in step 1, replace the submersible
|The red light flashes slowly.|
Buzzer slow tweet (On for 1s, Off for 1s)
Liquid shortage alarm
|1. If the S3 sensor is used, check if the Freshwater Reservoir is short of liquid.|