AmGuard 250 ml

AmGuard 250 ml

817.00

  • Detoxifies Ammonia for up to 48 hours
  • Ideal for emergency situations
  • More effective than any other ammonia-binding product
  • Most concentrated product on the market

Out of stock

SKU: 000116077606 Category:

Share:

AmGuard 250 ml:

It safely, rapidly and efficiently removes toxic free ammonia. It is safe to use during tank cycling and is ideal for treating emergency situations. AmGuard is the strongest liquid ammonia binder on the market. It works within minutes to detoxify free ammonia, and it doesn’t degrade for nearly 72 hours. That at least twice as long as our competitors products. Unlike competing products, AmGuard converts it into a safe, non-toxic form that is readily removed by the tank biofilter. It does not alter pH. Ammonia can exist in two forms: free and ionized. It is only the free form that is toxic. Traditional ammonia test kits convert all ammonia to free ammonia by raising pH to 12-14; at this pH AmGuard cannot function and thus a false positive reading will result. For long term ammonia control, use Seachem Stability and Matrix. Use Ammonia Alert or MultiTest: Free & Total Ammonia to directly monitor levels of free ammonia. AmGuard also removes chlorine and chloramines.

Directions

Use 1 capful (5 mL) for every 200 L (50 US gallons) daily or as needed to reduce ammonia.

ADVANCED: If you have an Ammonia Alert that is reading Alert then use 1 capful (5 mL) for every 400 L (100 gallons) daily. If it reads Alarm then use 1 capful for every 200 L (50 gallons) daily. If it reads Toxic, then use 1 capful for every 80 L (20 gallons) daily.

EXPERT: If using our MultiTest: Free & Total Ammonia test kit, use 1 capful (5 mL) for every 40 L (10 gallons) to remove 1 mg/L (ppm) of free ammonia. Alternatively you may employ the following formula for a variety of ammonia and water levels: 0.125AV=m (for volume in liters) or 0.5AV=m (for volume in gallons). A=ammonia concentration in mg/L, V=the volume of water being treated and m=the volume of AmGuard to use in mL. For example, to remove 1 mg/L of ammonia in 100 gallons you would use 0.5*100=50 mL.

If water temperature is above 30°C (86°F) do not use.

Brand

Seachem

Customer reviews
  • 0
    0 ratings
  • 1 Star
    0%
    2 Stars
    0%
    3 Stars
    0%
    4 Stars
    0%
    5 Stars
    0%
Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

TOP

X